Silicone Face Mask

As a manufacturer deeply engaged in the silicone molding industry, Aobo Silicone maintains full control over the entire process from raw material screening to finished product inspection. Our core product range covers silicone earplug tips and multi-specification facial protective products. This silicone face mask is crafted with a one-piece molding process, featuring a smooth burr-free surface and thinned edges for enhanced wearing fit and sealing performance. The product is washable and reusable with excellent weather resistance, maintaining stable physical properties under various temperature and humidity conditions.

Product Advantages

This silicone face mask has been optimized through multiple rounds of practical testing, balancing practical performance and user experience. Its core advantages lie in four dimensions: material, craftsmanship, design, and adaptability, each verified in real scenarios to effectively solve core problems in use.

1. Skin-Friendly & Safe Material

• Made of food-grade liquid silicone raw material, odorless and non-irritating
• Chemically stable formula, sweat and grease resistant, not prone to bacteria growth
• Hypoallergenic composition, suitable for prolonged close-fitting wear

2. Ergonomic Contoured Fit

• Modeled based on 3D facial data for high edge fit and minimal shifting during wear
• Evenly distributes facial pressure, leaving no obvious pressure marks after long hours of wear
• Adapts to various face shapes, covering mainstream wearing size ranges

3. One-Piece Molding Craftsmanship

• Seamless one-piece injection molding with no splicing gaps for superior sealing performance
• Soft matte surface treatment, resistant to dust and fingerprints for easy maintenance
• Rounded and polished edges, free of burrs to avoid skin scratches

4. Durable & Easy to Maintain

• Wide temperature resistance range, compatible with various common disinfection methods
• Cleanable with clean water, supporting repeated and cyclic use
• High tensile and tear resistance, not easily deformed or damaged under normal use

Product Qualifications & Quality Assurance

Aobo Silicone always integrates quality control throughout the entire production chain. We have set up multiple inspection checkpoints from raw material incoming to finished product delivery, and established a comprehensive quality management system to ensure delivered products meet all compliance requirements and quality standards.

1. Quality Management System

• The factory is ISO9001 certified, with standardized production operation procedures in place
• Independent QC department implements a three-tier inspection mechanism: first article inspection, in-process patrol inspection, and finished product final inspection
• Complete production records and inspection reports are retained for each batch, supporting full-process quality traceability

2. Material Safety Certifications

• All silicone raw materials have passed FDA, LFGB and other food contact safety certifications
• Complete material test reports and MSDS safety data sheets are available upon request
• No harmful additives are used in production, and finished products comply with RoHS environmental requirements

3. Industry Implementation Standards

• Strictly follows silicone product industry production specifications and dimensional tolerance standards
• For protective products, production is carried out with reference to relevant facial protective product performance indicators
• Can adapt to corresponding regional compliance testing standards according to target market requirements

Item	Details
Product name	Silicone Respirator Mask Series
Specification available	Models SR-M100 ~ SR-P100, available sizes S / M / L / XL
Protection ratings	N95, KN95, FFP2, Organic Vapor Proof, Full-face Chemical Protection, PAPR Class A
Material to be used	Medical / Food / Industrial grade virgin liquid silicone rubber (LSR)
Colors available	Transparent, gray, black, or as per customer request
Standards that follow to	NIOSH 42 CFR 84, GB 2626-2019, GB 2890-2009, CE EN149 / EN140 / EN136, FDA
Compatible filter & accessories	Filter cotton, gas cartridges, head straps and other accessories can be customized per request
Accessory material	Filter media: PP melt-blown / activated carbon; Head strap: elastic nylon / silicone
Packing method	Individual polybag per piece, 20/50 pieces per export carton; custom packaging available
MOQ	Negotiable (small trial orders supported)
Production lead time	3-5 days for stock orders, 7-12 days for OEM custom orders
Warranty time	1 year for mask body under normal use (filters are consumables)
Payment term	T/T or L/C at sight, Trade Assurance supported
FOB loading port	Shenzhen or Guangzhou, China
Manufacturer	Dongguan Aobo
Place of origin	Dongguan, Guangdong, China

Quality Commitment

We promise that all ex-factory products have passed full inspection. In case of non-artificial quality issues such as material defects or process flaws, we provide return and exchange services as well as dedicated after-sales follow-up to fully protect customers' procurement rights and cooperation experience.

Face Type Specification (Adaptable Face Width)	Silicone Main Body Thickness (mm)	Medical Half-Face Mask (N95 Level)	Industrial Dustproof Half-Face Mask (KN95)	Organic Vapor Gas-Proof Half-Face Mask	Medical Full-Face Protection Mask	Industrial Full-Protection Full-Face Mask	Chemical Gas-Proof Full-Face Mask	Powered Air-Purifying Silicone Mask (Class A)
Protection Level Classification	-	GB 19083-2010 Medical N95 Level	GB 2626-2019 KN95 Level	GB 2890-2009 Organic Vapor Protection	GB 19083-2010 Full-Face Protection	GB 2626 + GB 2890 Dual Standard	GB 2890-2009 Full-Face Chemical Protection	GB 30864-2014 Class A Powered Air Supply
Infant Size (≤85mm)	1.0	1.1	-	-	-	-	-	-
Kids Size (≤95mm)	1.2	1.3	1.4	-	-	-	-	-
Small Size S (≤105mm)	1.2	1.4	1.5	1.5	1.6	1.7	1.8	-
Medium Size M (106-115mm)	1.3	1.5	1.6	1.6	1.7	1.8	1.9	-
Large Size L (116-125mm)	1.4	1.6	1.7	1.7	1.8	1.9	2.0	-
Extra Large Size XL (≥126mm)	1.5	1.7	1.8	1.8	1.9	2.0	2.1	-
Wide Face Custom Size XXL (≥135mm)	1.6	1.8	1.9	1.9	2.0	2.1	2.2	-

Practical Application Scenarios

This silicone face mask is applicable to multiple scenarios requiring facial protection and sealing, providing systematic supporting solutions for common pain points in the industry.

1. Industry Pain Points

• Ordinary protective components have poor fit and unstable sealing effect, prone to leakage and air leakage
• Obvious pressure marks and strong foreign body sensation after long-term wear, resulting in low acceptance among frontline users
• Most are disposable consumables with fast wear rate, leading to high long-term procurement costs for enterprises

2. Supporting Solutions

• Targeted optimization of contour structure, with adjustable sealing surface morphology for different scenarios to improve adaptability
• Can be matched with peripheral accessories such as adjustable straps, filter components and cushion pads to form a complete use solution
• Provide high-durability material options to support cyclic use, effectively reducing customers' long-term use cost

Applicable Fields

This product features wide adaptability and covers application scenarios in multiple industries, fully meeting the core use requirements of different fields.

• Industrial labor protection: Meets facial sealing protection needs in dust and droplet environments, supports compatible installation of filter components
• Medical aesthetics & skincare: Adaptable to facial skincare scenarios such as essence introduction, cold and hot compress; skin-friendly and non-irritating, reusable after disinfection
• Daily protection: Meets basic protection needs for daily travel, lightweight and comfortable to wear, easy to store and carry
• Scientific research laboratories: Adaptable to basic protection scenarios in laboratories, resistant to some chemical reagents, convenient for cleaning and disinfection

Customization Solutions

Aobo Silicone provides full-dimensional product customization services. We offer flexible exclusive customization solutions based on customers' design drawings, application scenarios and brand needs to fully meet differentiated product requirements.

Customizable Items

• Material selection: Available in liquid/solid silicone raw materials with different hardness and performance to meet needs of different scenarios
• Appearance customization: Supports color matching, surface texture, logo silk-screening/engraving, brand identification and other appearance detail adjustments
• Structure optimization: Core parameters such as contour, thickness, sealing edge and interface structure can be adjusted according to wearing needs
• Packaging customization: Customized outer packaging, inner trays, manuals and other materials are available to adapt to brand sales needs

Customization Process

1. Demand communication: Customers provide product drawings, samples or detailed requirement descriptions, and both parties confirm the customization direction and core parameters
2. Solution evaluation: The engineering team evaluates structural and process feasibility, and issues an official quotation and lead time plan
3. Mold opening & sampling: After both parties confirm the solution, mold development is initiated, and the first batch of samples is produced and sent to the customer for confirmation
4. Sample testing & optimization: Customers feedback sample modification opinions, and the factory makes targeted adjustments until the sample is finally confirmed
5. Mass production: After sample confirmation, mass production is scheduled, with production progress and quality inspection status updated throughout the process
6. Quality inspection & delivery: Finished products undergo full inspection before standardized packaging, and are delivered via logistics to the customer's designated receiving location

ODM Volume-Based Discount Policy

For ODM cooperation orders, we adopt a tiered pricing system: the larger the order quantity, the lower the unit product price. Large-volume orders also enjoy value-added services such as priority production scheduling, dedicated account manager support, and free structural optimization. For long-term cooperative customers, exclusive supply prices and flexible payment terms are available to achieve mutual benefit and win-win results.

Frequently Asked Questions

Q: Are you a source factory or a trading company? What is your production scale?
A: We are Aobo Silicone, a source factory with its own production base. With over ten years of experience in the silicone product industry, we are equipped with multiple liquid and solid silicone production lines, capable of handling both small-batch trial production and large-scale mass production orders.

Q: Is the material of this product safe? Do you have relevant certifications?
A: The silicone face mask is made of food-grade liquid silicone, and the raw materials have passed multiple international safety certifications such as FDA and LFGB. We can provide complete material test reports and compliance documents to ensure safety in use.

Q: Do you support small-batch customization? What is the minimum order quantity?
A: Small-batch customization is supported. Regular in-stock models can be shipped with a low MOQ. For mold-opening customization, the MOQ is set according to process complexity. Please contact our sales staff for detailed information.

Q: How long does it take to make customized samples? What is the lead time for mass production?
A: Samples with color change or simple adjustments based on existing molds can be delivered in 3-5 days. The sample cycle for new mold opening is about 7-15 days. The lead time for mass production depends on order volume and process difficulty, usually 15-30 days. Rush orders can be negotiated for priority scheduling.

Q: Can the product be used with our existing filter accessories?
A: We support customized interface structure adaptation. Customers can provide the dimensional parameters of their existing accessories, and we can adjust the product's interface structure accordingly to achieve full compatibility.

Q: How should the product be cleaned and maintained? What is its approximate service life?
A: The product can be directly rinsed with clean water and neutral detergent, and reused after drying. Avoid scratching with sharp objects in daily use. Under normal use and proper maintenance, it can be reused for several months; the specific duration varies slightly by use environment and frequency.

Q: Do you support ODM private labeling? Can you make custom brand packaging?
A: We provide full-process ODM services. We can produce products according to customers' design solutions, and support brand logo engraving, custom packaging, user manuals and other private labeling needs to help customers build their own brands.

Q: What should I do if I find quality problems after receiving the goods?
A: All products undergo full inspection before leaving the factory. If non-artificial quality problems are found after receipt, please contact the after-sales contact within 7 working days, and we will provide solutions such as return, exchange or replacement promptly.